How to replace a cracked or broken screen on an iPad 2

If you've got an iPad 2 with a broken or cracked screen, AppleCare or insurance won't help, and you're interested in saving some money and fixing it yourself, we can help walk you through a DIY repair. iPad repairs aren't easy, but they aren't impossible either. So if you didn't opt for AppleCare+ and an outright replacement isn't an option, replacing the screen yourself may be worth considering.
Disclaimer: As with any repair, neither iMore nor PXLFIX can be held responsible for any damage you may do to your device. It’s also worth considering that opening up your device to perform any repair or modification can and will void your Apple warranty. If you don’t feel comfortable opening your device, don’t. Use extreme care and caution when performing a repair on any device.
What you need to perform an iPad 2 screen replacement
PXLFIX recommends using only quality and genuine parts from a reputable supplier like eTech Parts. They have quality parts, tools, and much more for all your repair needs.
- iPad 2 (Wi-Fi or 4G model)
- Replacement digitizer - Link to black digitizer replacement, Link to white digitizer replacement - The parts we have linked to come complete with adhesive, camera hold, and Home button assembly. If you order these exact parts you will not need an iPad replacement adhesive kit
- Hair dryer or heat gun - Link to part
- iPad opening tool - Link to part
- iPad replacement adhesive kit - Link to part - there are several types of adhesive kits you can buy or you can cut your own but we recommend using a pre-cut kit as it will make the process much simpler
- Double zero (#00) Phillips screwdriver - Link to part
- Metal spudgers - Link to part
- 4-6 pry tools - Link to part
Power off your iPad 2

Before performing any kind of repair on any device you should always power it off first.
Take note of caution areas
Underneath the digitizer of the iPad are a few caution areas you want to watch out for. These areas have either sensitive cables or components that can be damaged very easily. So memorize where these areas are and move extremely carefully when working around them.
Cellular antenna (3G models only)

You'll only need to worry about the cellular antenna if you've got a 3G model. If you've got a Wi-Fi only model, this isn't a caution area for you.
Along the top you will find the cellular antenna. It runs along both sides of the front facing camera. It can easily become attached to the adhesive on the underside of the digitizer and pull up with it. To avoid this from happening you'll want to use a pry tool to hold them down when prying around it. This ensures that it doesn't come up with the screen.
Power button cable

The power cable sits at the top right of the iPad 2 and can easily be knicked with a pry tool or iPad opening tool. You'll want to work very cautiously around it to prevent tearing it. You can see in the image how thin it really is. Taking care around it will prevent issues with the power button after reassembly.
Wi-Fi antenna

The Wi-Fi antenna in the iPad 2 is located along the bottom directly to the right of the Home button. Just like the cellular antenna, it can get caught on the adhesive and be pryed up with the digitizer when you're removing it. Make sure when you're working around this area that you are extra cautious not to tear it.
Digitizer cable

The digitizer cable is located towards the bottom left corner of the iPad about 2 inches up. Even though you'll be removing it and replacing it, still take care not to push it too hard as it can push into the LCD and damage it or pull up on components underneath the LCD. It's best to work around it.
Remove the cracked display
This is the most difficult part of performing an iPad 2 or new iPad screen replacement as the screen is held in with nothing but adhesive. We are going to have to heat it up to soften the adhesive and slowly remove it with our iPad opening tool. Make sure you perform this step extremely carefully and take your time.
Make sure you have made a good mental note of the caution areas mentioned above.
- The best place to start is the lower left hand corner of the iPad. Use your heat gun to heat up this area. Use circular motions about an inch from the surface of the iPad and don't stay in any one area too long.




This is the longest process and the most tedious. Take your time and make sure each area is heated thoroughly before you move to another section or attempt to remove the digitizer.
Once you think you've gotten all or almost all of the adhesive broke we can pry up the digitizer.
- Carefully lift up the right side of the digitizer in order to swing it to the left. Be careful to wath the caution areas to make sure they aren't being pulled up along with the broken digitizer. If they are, break the adhesive holding them onto the screen before prying any further.

Remove the LCD assembly
Before we proceed any further into cleaning out the frame, we want to get the completely exposed LCD out of the way and place it somewhere safe.
- Remove the 4 screws in each corner of the LCD with your #00 Phillips screwdriver.





Remove what is left of the old digitizer cable
- Flip up the two clasps that hold the two sides of the cable in place.


Clean out the frame of the iPad

Before moving on you'll most likely have a lot of glass and left over adhesive in the frame. You will need to remove all of it before placing in a new assembly.
If you need to, use your heat gun in order to heat up any left over adhesive on the frame to make it easier to peel off. There's really no nice and tidy way to do this. Use a pry tool or metal spatula to whittle away the excess broken glass and adhesive.
Once you are positive that the entire frame is free of old adhesive and broken glass, we can move on.
Ready the new assembly

You'll only need to use this step if the new digitizer assembly you ordered did not come with the Home button and camera hold pre-assembled onto the new one. If it did, skip this step and move on. If it didn't, continue reading this section.
Remove the following items with your pry tool off the old digitizer assembly taking care not to bend them.
- Home button bracket
- Home button
- Camera hold (located at the top of the digitizer where the front facing camera would sit underneath it)
Place the Home button on the new assembly
- Start by placing the actual Home button on the new assembly. Use the edge of the frame to make sure it is lined up correctly and straight.




Place the camera hold on the new assembly

To put the camera hold on the new assembly, apply new adhesive to the back of it if necessary (again, it's recommended). Use the top of the frame to make sure it's lined up correctly and push down firmly.
To make sure it's in correctly, you can always lay it down carefully in the iPad frame and make sure the top lines up without getting caught up on anything around the camera hold.
Apply new adhesive to the iPad frame

If you have ordered a new iPad digitizer that already has the adhesive applied, you can skip this step.
- Start in any corner you'd like and start carefully laying the new adhesive around the edge of the screen. Pre-cut strips work the best but you may cut your own as well.
- Make sure you don't cover up any components around the Home button area that shouldn't be covered. Also take care around wires so you don't nick or cover them in adhesive.
- Once you're done applying the new adhesive, don't peel off the backing of it just yet.
Attach the new digitizer assembly
- Once you've gotten the new assembly ready to go we can attach it to the iPad.
- Carefully insert the two ends of the digitizer cable into the socket you removed the old one from. In order to get the cable to fit correctly, part of the cable will need to be tucked underneath the metal frame.


Replace the LCD assembly
- Just like you attached the digitizer assembly, carefully re-attach the LCD assembly in the same way.
- Make sure the cable is pushed all the way in. Once it is, fasten the clip that holds it into place.


Test the digitizer assembly
Before peeling off the backing to the adhesive, now is a perfect time to test the assembly instead of waiting until you've stuck down the screen with adhesive before realizing it's defective.
Gently flip over the digitizer and power on the iPad. Once the slide to unlock screen comes up, go ahead and slide your finger to unlock to make sure the screen responds to touch. Tab through the Home screens for a minute to make sure everything is working like normal.
If everything is in good shape, go ahead and hold down the power button and slide to power off again.
If you had issues, double-check the digitizer cable again making absolutely sure it's all the way in place and secured. If you still have no touch capability, you may have a defective unit and need to send it back. This is very uncommon if you've used a good supplier that offers quality parts. It does happen from time to time though. If this is the case, place your iPad somewhere safe until the supplier sends you a new replacement digitizer assembly.
Remove adhesive backing, protective shields, and secure the new digitizer

This part can be a bit tricky as well so make sure you're careful and that you lay the digitizer down very carefully.
- Pull the backing off all the adhesive taking care around the digitizer cable and making sure that the cable doesn't get stuck. Now remove the protective backing off the inside of the digitizer that protects the screen from getting dust on the inside.
- Carefully flip the digitizer into place making sure that you are lining up the frame at the top and the bottom. Pay specific attention around the front-facing camera and by the bottom around the Home button. Test the Home button and make sure it depresses ok and look at the front-facing camera to make sure it's lined up correctly.
- Continue working your way around the frame gently pushing it into place.
- The bottom left corner where the digitizer cable sits may need a bit of extra pressure to make sure it secures over the cable.
- Once you're satisfied with how the digitizer is sitting, pull out your heat gun and gently heat around the frame one last time.
- Use a cleaning cloth so you don't burn your fingers and slowly work your way around the frame applying even pressure in each section to secure the digitizer to the frame. I'd recommend heating up small portions at a time and holding each section down for 30 seconds until you've made your way around the entire iPad.
And ...done!

Once you've made sure the digitizer is secure you can go ahead and power on your iPad 2. If all was done correctly, you should now have a working iPad 2 again without a shattered screen.
This ranks as one of the hardest most ninja level iOS device DIY repairs so if you succeeded, give yourself a huge pat on the back. The good news is, if you performed this repair with great results, you shouldn't have any issue performing any other iPhone or iPod touch repair in the future.
More DIY help and how to's
If you run into issues with this repair or need additional input or help, our mod and DIY repair forums are a great place to start.
Want to know how to perform another type of iPhone, iPad, or iPod touch repair or modification? Send me suggestions to ally@imore.com.
To ask us questions or to inquire about mail-in repairs through PXLFIX, please follow us on Twitter, like us on Facebook or e-mail us directly! Of course, you can like us and follow us just because you think we're cool too!
Additional Resources:
- How to replace a cracked screen on a new iPad (iPad 3)
- How to replace a cracked screen on a GSM/AT&T iPhone 4
- How to replace a cracked screen on a Verizon or Sprint (CDMA) iPhone 4
- How to replace a cracked screen on an iPhone 3G or iPhone 3GS
- How to replace a cracked screen on a 4th generation iPod touch
- Even more DIY tutorials
Source: http://feedproxy.google.com/~r/TheIphoneBlog/~3/GjzHiP83t54/story01.htm
AVNET TRANSACTION SYSTEMS ARCHITECTS HCL TECHNOLOGIES SPSS TOTAL SYSTEM SERVICES ELECTRONIC DATA SYSTEMS MICROCHIP TECHNOLOGY

